2,4,4-Trimethyl-1,6-diisocyanatohexane

  • 2,4,4-Trimethylhexamethylene diisocyanate
  • 2,4,4-Trimethylhexamethylene isocyanate
  • 1,6-Diisocyanato-2,4,4-trimethylhexane
  • Isocyanic acid, 2,4,4-trimethylhexamethylene ester
Formula
C11H18N2O2
Structure

Registry Numbers and Inventories.
CAS
15646-96-5
EC (EINECS/ELINCS)
239-714-4
EC Index Number
615-010-00-6
EC Class
Toxic; Irritant; Sensitising
UN (DOT)
2328
Beilstein/Gmelin
2094427
Canada DSL/NDSL
DSL
US TSCA
Listed
Austrailia AICS
Listed
Japan ENCS (MITI)
Listed
Korea ECL
Listed

Properties.
Formula
C11H18N2O2
Formula mass
210.28
Boiling point, °C
278
Vapor density (air=1)
7.3
Critical temperature
442
Critical pressure
18.7
Solubility in water
Insoluble

Hazards and Protection.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Small spills/leaks
ELIMINATE all ignition sources and groumd all equipment used when handling the product. Do not touch spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. FOR CHLOROSILANES, use AFFF alcohol-resistant medium expansion foam to reduce vapors. DO NOT GET WATER on spilled substance or inside containers. Cover with DRY earth, DRY sand, or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Use clean non-sparking tools to collect material and place it into loosley covered plastic containers for later disposal.
Stability
No data.
Incompatibilities
Incompatible with many classes of compounds, reacting exothermically to release toxic gases Reactions with amines, aldehydes, alcohols, alkali metals, ketones, mercaptans, strong oxidizers, hydrides, phenols, and peroxides can cause vigorous releases of heat.

Fire.
Fire fighting
Note: Most foams will react with the material and release corrosive/toxic gases. Small Fires: carbon dioxide, dry chemical, dry sand, alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam.
Fire potential
Combustible material: may burn but does not ignite readily.
Hazards
Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas.
Combustion products
Fire will produce irritating, corrosive and/or toxic gases.

Health.
Exposure effects
   Ingestion
See Inhalation.
   Inhalation
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns, or death.
   Skin
See Inhalation.
   Eyes
See Inhalation.

First aid
 
   Ingestion
Seek medical assistance.
   Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
   Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
   Eyes
Immediately flush with running water for at least 20 minutes.

Transport.
UN number
2328
Response guide
Hazard class
6.1
Packing Group
III
 
USCG CHRIS Code
THI
 
IMO Chemical Code
17
IMO Pollution Category
B
IMO Hazard code
S/P