- Propanoic cid, 2-hydroxy- , antimony (3+) salt (3:1)
- Lactic acid, antimony salt
- Antimony trilactate
Antimony lactate is an odorless, tan colored solid.
Registry Numbers and Inventories.
Hazards and Protection.
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Wear appropriate protective gloves, clothing and goggles.
Wear positive pressure self-contained breathing apparatus (SCBA).
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Use natural deep water pockets, excavated lagoons, or sand bag barriers to trap material at bottom. Remove trapped material with suction hoses.
Reacts as bases to neutralize acids.
Do not extinguish fire unless flow can be stopped. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Solid streams of water may be ineffective. Use alcohol foam, dry chemical or carbon dioxide.
Containers may explode when heated. Runoff may pollute waterways.
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
NIOSH REL*: TWA 0.5 mg/m3 OSHA PEL*: TWA 0.5 mg/m3 [*Note: REL and PEL also apply to other antimony compounds (as Sb).] IDLH 50 mg/m3 (as Sb)
The toxological properties of this substance have not been fully investigated.
Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Effects of contact or inhalation may be delayed.
Avoid any skin contact. See Inhalation.
Seek medical assistance.
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes. Remove material from skin immediately. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
Immediately flush with running water for at least 20 minutes.
USCG CHRIS Code
Std. Transport #