Butyl glycolyl butyl phthalate
- Butoxycarbonylmethyl butyl phthalate
- Butyl carbobutoxymethyl phthalate
- Butyl phthalate butyl glycolate
- Butyl phthalyl butyl glycolate
- Dibutyl o-(o-darboxybenzoyl)glycolate
- Dibutyl o-darboxybenzoyloxyacetate
Colorless liquid. Odorless.
Plasticizer for polyvinyl chloride.
Registry Numbers and Inventories.
Mutagen; Reproductive Effector; Primary Irritant
Swiss Giftliste 1
Japan ENCS (MITI)
Melting point, °C
Boiling point, °C
Vapor pressure, mmHg
1.5E-7 (25 C)
Vapor density (air=1)
1.095 g/cm3 (25 C)
Solubility in water
120 ppm (25 C)
295.00 cp (0 C)
Partition coefficient, pKow
Heat of vaporization
Hazards and Protection.
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Use of garments to protect workmen from irritation due to contact with phthalic anhydride which is used in the manufacturing process of phthalic acid esters; the use of gloves to prevent contamination of the hand and lower arm. Synth of phthalates require good ventilation in order to minimize contamination of air with phthalic anhydride or alcohols. There may be also some need for skin protection. Handling mineral acids used as catalysts requires ordinary precautions.
Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces.
Extremely light stable very
Strong oxidizing agents.
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire.
Slight risk when exposed to heat or flame; can react with oxidizing materials.
Central nervous system depression may occur with ingestion of large amounts.
Gi tract or esophageal irritation may occur.
Respiratory irritation is uncommon, but possible.
Dermal irritation may sometimes develop.
Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual on the left side with the head down. Contact a physician, medical facility, or poison control center for advice about whether to induce vomiting. If possible, do not leave individual unattended.
Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists.
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.