Halowax 1013

Formula
Unspecified
Description
Flakes.
Uses
Electrical insulation and fire-resisting materials, impregnants, sealing compounds, crankcase additive, ingredient in penetrating oils, plasticizer, protective coatings. Halowax.

Registry Numbers and Inventories.
CAS
12616-35-2
Beilstein/Gmelin
NA

Properties.
Melting point, °C
~120
Density
1.67 g/cm3 (25 C)

Hazards and Protection.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respirators
Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
Small spills/leaks
Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces.
Stability
Polychloronaphthalene mixtures remain stable even at temperatures up to their boiling range.
Incompatibilities
Strong oxidizing agents.

Fire.
Fire fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire.

Health.
Exposure effects
CNS depression and coma may be seen.
   Skin
Acneiform rashes and chloracne have been reported in exposed workers.

First aid
 
   Ingestion
Administer charcoal as a slurry (240 ml water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents. Consider after ingestion of a potentially life-threatening amount of poison if it can be performed soon after ingestion (generally within 1 hour). If hepatic failure occurs, intensive supportive therapy should be provided.
   Inhalation
Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
   Skin
Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. A variety of topical treatments may useful if chloracne occurs. Dermatologic consultation is suggested.
   Eyes
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.

Transport.