Isobutyl isocyanate

  • 1-Isocyanato-2-methylpropane
  • 2-Methylpropyl isocyanate
Formula
C5H9NO
Structure
Description
A colorless liquid.
Uses
Used to make pesticides and pharmaceuticals.

Registry Numbers and Inventories.
CAS
1873-29-6
EC (EINECS/ELINCS)
217-495-6
UN (DOT)
2486
Beilstein/Gmelin
969400
Beilstein Reference
4-04-00-00653

Properties.
Formula
C5H9NO
Formula mass
99.13
Boiling point, °C
106
Critical temperature
287
Critical pressure
33.6
Solubility in water
Insoluble
Refractive index
1.4195 (20 C)

Hazards and Protection.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Small spills/leaks
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard.
Stability
No data.
Incompatibilities
Incompatible with many classes of compounds, reacting exothermically to release toxic gases Reactions with amines, aldehydes, alcohols, alkali metals, ketones, mercaptans, strong oxidizers, hydrides, phenols, and peroxides can cause vigorous releases of heat.

Fire.
Flash Point,°C
22.8
Fire fighting
Use water in flooding quantities as fog. Use alcohol foam, dry chemical or carbon dioxide. Cool all affected containers with flooding quantities of water. Do not extinguish fire unless flow can be stopped. Apply water from as far a distance as possible. Keep run-off water out of sewers and water sources.
Fire potential
HIGHLY FLAMMABLE.
Hazards
Vapors form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
Combustion products
Fire will produce irritating, corrosive and/or toxic gases.

Health.
Exposure effects
   Ingestion
See Inhalation.
   Inhalation
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns, or death. Effects may be delayed.
   Skin
See Inhalation.
   Eyes
See Inhalation.

First aid
 
   Ingestion
Seek medical assistance.
   Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
   Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
   Eyes
Immediately flush with running water for at least 20 minutes.

Transport.
UN number
2486
Response guide
Hazard class
3
PRTC
T
Packing Group
I
 
Std. Transport #
4907409