- Lead phosphite, dibasic
- Lead oxide phosphonate
Registry Numbers and Inventories.
Hazards and Protection.
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Wear appropriate protective gloves, clothing and goggles.
Wear positive pressure self-contained breathing apparatus (SCBA).
Keep sparks, flames, and other sources of ignition away. Build dikes to contain flow as necessary.
Reacts violently with hydrogen sulfide.
Extinguish fire using agent suitable for type of fire.
May be ignited by friction, heat, sparks or flames. Some may burn rapidly with flare burning effect. Powders, dusts, shavings, borings, turnings or cuttings may explode or burn with explosive violence. Substance may be transported in a molten form. May re-ignite after fire is extinguished.
Fire may produce irritating and/or toxic gases.
TLV (as Pb): ppm; 0.05 mg/m3 A3 (ACGIH 1996). MAK: ppm; 0.1 mg/m3; as Pb (1996).
G-A3, I-2B, CP65
The toxological properties of this substance have not been fully investigated.
May cause burns.
Seek medical assistance.
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
In case of contact with substance, immediately flush with running water for at least 20 minutes.
Std. Transport #