Mercury(II) hydrogen arsenate
- Mercuric arsenate
A yellow powder.
Used to make waterproof paints.
Registry Numbers and Inventories.
Melting point, °C
Boiling point, °C
Vapor pressure, mmHg
13.6 g/cm3 (20 C)
Solubility in water
Hazards and Protection.
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Wear appropriate protective gloves, clothing and goggles.
Wear positive pressure self-contained breathing apparatus (SCBA).
Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Cover with plastic sheet to prevent spreading. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.
Incompatible with the following: Acetylene, ammonia, chlorine dioxide, azides, calcium (amalgam formation), sodium carbide, lithium, rubidium, copper.
Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources.
Containers may explode when heated. Runoff may pollute waterways.
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
NIOSH REL: C 0.1 mg/m3 [skin] OSHA PEL: C 0.1 mg/m3 10 mg/m3 (as Hg)
O, G-A1, I-1, N-1, CP65
The toxological properties of this substance have not been fully investigated.
Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Effects of contact or inhalation may be delayed.
Avoid any skin contact. See Inhalation.
Seek medical assistance.
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
Remove and isolate contaminated clothing and shoes. Remove material from skin immediately. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
Immediately flush with running water for at least 20 minutes.