m-(Fluorosulfonyl)acetophenone

  • 3-Acetylbenzenesulfonyl fluoride
Formula
C8H7FO3S
Structure
Description
Tan crystalline powder solid.

Registry Numbers and Inventories.
CAS
709-60-4
EC (EINECS/ELINCS)
211-912-5
RTECS
DB8941000
RTECS class
Other
UN (DOT)
1759
Beilstein/Gmelin
2721786

Properties.
Formula
C8H7FO3S
Formula mass
202.20
Melting point, °C
90-92
Boiling point, °C
313
Solubility in water
Insoluble
Partition coefficient, pKow
0.80

Hazards and Protection.
Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Discard contaminated shoes.
Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Small spills/leaks
Clean up spills immediately, using the appropriate protective equipment. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.
Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, strong bases.
Decomposition
Carbon monoxide, oxides of sulfur, carbon dioxide, fluoride fumes.

Fire.
Fire fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide.
Fire potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Hazards
Contact with metals may evolve flammable hydrogen gas.
Combustion products
Fire may produce irritating, corrosive and/or toxic gases.

Health.
Exposure effects
   Ingestion
The toxicological properties of this substance have not been fully investigated. Causes digestive tract irritation with possible burns.
   Inhalation
The toxicological properties of this substance have not been fully investigated. Causes respiratory tract irritation with possible burns.
   Skin
Causes skin burns.
   Eyes
Causes eye burns.

First aid
 
   Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
   Inhalation
Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
   Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Discard contaminated clothing in a manner which limits further exposure. Destroy contaminated shoes.
   Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Transport.
UN number
1759
Response guide
Hazard class
8
Packing Group
I; II; III