N,N-Dimethyl-p-phenylenediamine oxalate

  • N,N-Dimethyl-1,4-benzenediamine ethanedioate (2:1)
Formula
2C8H12N2 . C2H2O4
Structure
Description
Gray or beige to brown powder.

Registry Numbers and Inventories.
CAS
62778-12-5
EC (EINECS/ELINCS)
263-723-2
RTECS
CZ1586550
RTECS class
Other
UN (DOT)
2811
Beilstein/Gmelin
4046100
Canada DSL/NDSL
DSL
US TSCA
Listed
Austrailia AICS
Listed
New Zealand
Listed

Properties.
Formula
2C8H12N2.C2H2O4
Formula mass
362.43
Melting point, °C
200

Hazards and Protection.
Storage
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Small spills/leaks
Clean up spills immediately, using the appropriate protective equipment. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.
Stability
Stable under normal temperatures and pressures.
Incompatibilities
Oxidizing agents.
Decomposition
Carbon monoxide, oxides of nitrogen, carbon dioxide.

Fire.
Fire fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Dusts at sufficient concentrations can form explosive mixtures with air. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or chemical foam.
Fire potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Hazards
Contact with metals may evolve flammable hydrogen gas.
Combustion products
Fire may produce irritating, corrosive and/or toxic gases.
Health
3
 
Flammability
0
 
 
Reactivity
0
 

Health.
Exposure effects
   Ingestion
May be fatal if swallowed. The toxicological properties of this substance have not been fully investigated.
   Inhalation
The toxicological properties of this substance have not been fully investigated.
   Skin
Causes slight skin irritation.
   Eyes
Dust may cause mechanical irritation.

First aid
 
   Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
   Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
   Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
   Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Transport.
UN number
2811
Response guide
Hazard class
6.1
Packing Group
I; II; III