- 1-(3,4-Dimethoxybenzyl)-6,7-dimethoxyisoquinoline hydrochloride
- 6,7,3',4'-Tetramethoxy-1-benzylisoquinoline hydrochloride
- 6,7-Dimethoxy-1-veratrylisoquinoline hydrochloride
- Papaverine hydrochloride
White crystalline powder.
Vasodilaor. Improves blood circulation. Approved to treat erectile dysfunction.
Registry Numbers and Inventories.
Drug; Mutagen; Reproductive Effector; Human Data
Japan ENCS (MITI)
Melting point, °C
Solubility in water
Hazards and Protection.
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Wear appropriate safety goggles, protective clothing and gloves.
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stable under normal temperatures and pressures.
Sensitive to light.
Upon decomposition, this material can produce hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide, and nitrogen.
Fires involving this compound should be controlled with a dry chemical, carbon dioxide or halon extinguisher.
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Contact with metals may evolve flammable hydrogen gas.
Fire may produce irritating, corrosive and/or toxic gases.
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed.
Contact with molten substance may cause severe burns to skin and eyes. See Inhalation.
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
I; II; III