Perfluoro-1-octanesulfonyl fluoride

  • Perfluorooctanesulfonyl fluoride
Formula
C8F18O2S
Structure
Description
Colorless liquid.

Registry Numbers and Inventories.
CAS
307-35-7
EC (EINECS/ELINCS)
206-200-6
S 26 36/37/39 45
UN (DOT)
3265
Beilstein/Gmelin
1718067
Beilstein Reference
4-02-00-00996
Canada DSL/NDSL
NDSL
US TSCA
Listed
Austrailia AICS
Listed
Japan ENCS (MITI)
Listed
Korea ECL
Listed

Properties.
Formula
C8F18O2S
Formula mass
502.12
Melting point, °C
-1
Boiling point, °C
154-155
Vapor pressure, mmHg
<20 (20 C)
Vapor density (air=1)
>1
Density
1.824 g/cm3 (20 C)
Solubility in water
Reacts
Refractive index
1.30 (20 C)

Hazards and Protection.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).
Small spills/leaks
ELIMINATE all ignition sources. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.
Stability
No data.

Fire.
Flash Point,°C
-1
Fire fighting
Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Dry chemical, carbon dioxide, alcohol-resistant foam or water spray.
Fire potential
Combustible material: may burn but does not ignite readily.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
Combustion products
Fire may produce irritating, corrosive and/or toxic gases.
Health
3
 
Reactivity
0
 

Health.
Exposure effects
   Ingestion
Epigastric pain, nausea, dysphagia, salivation, hematemesis, and diarrhea may be noted. These effects may be delayed for several hours following exposure. Gi symptoms are noted when 3 to 5 mg/kg of fluoride are ingested.
   Inhalation
Respirations are first stimulated then depressed. Death is usually from respiratory paralysis. Following inhalation, coughing and choking may be noted.
   Skin
Urticaria and pruritus have been reported following exposure to fluoride.
   Eyes
See Inhalation.

First aid
 
   Ingestion
Administer milk, calcium gluconate, or calcium lactate to bind fluoride ion in the gastrointestinal tract. Antacids (aluminum and/or magnesium based) should be administered. Iv calcium (gluconate or chloride) and magnesium may be necessary to correct serum deficits of these divalent metals in serious overdosage. Monitor ekg and vital signs.
   Inhalation
Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
   Skin
Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists.
   Eyes
Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.

Transport.
UN number
3265
Response guide
Hazard class
8
Packing Group
I; II; III