Pyridinamine

  • Aminopyridine
Formula
C5H6N2
Structure
Description
Aminopyridine is a white or clear colored crystalline solid.

Registry Numbers and Inventories.
CAS
26445-05-6
RTECS
US1574000
RTECS class
Drug; Reproductive Effector
UN (DOT)
2671
Beilstein/Gmelin
NA

Properties.
Formula
C5H6N2
Formula mass
94.13
Melting point, °C
54
Boiling point, °C
194
Critical temperature
440
Critical pressure
57.6
Partition coefficient, pKow
0.61

Hazards and Protection.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection
Wear appropriate chemical protective clothing.
Respirators
Wear positive pressure self-contained breathing apparatus.
Small spills/leaks
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Use natural deep water pockets, excavated lagoons, or sand bag barriers to trap material at bottom. Remove trapped material with suction hoses.
Stability
No data.

Fire.
Fire fighting
Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources.
Fire potential
May burn but does not ignite readily.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. May polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.
Combustion products
Fire may produce irritating, corrosive and/or toxic gases.

Health.
Exposure effects
   Ingestion
See inhalation.
   Inhalation
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
   Skin
See inhalation.
   Eyes
See inhalation

First aid
 
   Ingestion
Seek medical assistance.
   Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
   Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
   Eyes
Immediately flush with running water for at least 20 minutes.

Transport.
UN number
2671
Response guide
Hazard class
6.1
Packing Group
II
 
Std. Transport #
4921510