Soybean oil, polymer with isophthalic acid and trimethylolethane

Formula
Unspecified
Description
Cloudy very viscous amber or dark amber liquid with black particulate matter. Has a mild odor.

Registry Numbers and Inventories.
CAS
66070-63-1
Beilstein/Gmelin
NA
Canada DSL/NDSL
NDSL
US TSCA
Listed
Korea ECL
Listed

Properties.
Boiling point, °C
141
Vapor pressure, mmHg
21
Density
0.9 g/cm3 (20 C)

Hazards and Protection.
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respirators
Where the neat test chemical is stored, weighed and diluted, wear an approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
Small spills/leaks
If you should spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability
No data.
Incompatibilities
Reacts in this way with all bases, both organic (for example, the amines) and inorganic Can react with active metals to form gaseous hydrogen and a metal salt Flammable and/or toxic gases and heat are generated by the reaction with with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides Incompatible with strong oxidizing agents.

Fire.
Fire fighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used.
Fire potential
This chemical is combustible.

Health.
Exposure effects
   Ingestion
See inhalation.
   Inhalation
Symptoms of exposure to this compound include irritation of the skin, nose and respiratory tract. It may cause severe eye irritation with redness, tearing and blurred vision. It can cause weakness, fatigue, headache, dizziness, incoordination, nausea, loss of consciousness, dermatitis, defatting of the skin and asthma-type sensitization. Ingestion of this chemical may cause vomiting which can lead to aspiration into the lungs causing chemical pneumonitis, pulmonary edema and hemorrhage. It can cause skin sensitization. Chronic exposure may cause permanent brain damage and nervous system damage.
   Skin
See inhalation.
   Eyes
See inhalation

First aid
 
   Ingestion
If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
   Inhalation
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
   Skin
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
   Eyes
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Transport.