- Stannous iodide
- Stannous diiodide
Used in two-step method for preparing organi/-inorganic perovskite thin films which exhibit uniform surfaces and strong photoluminescence.
Registry Numbers and Inventories.
61 20/21/22 36/37/38 42/43
53 22 26 36/37/39 45
Japan ENCS (MITI)
Melting point, °C
Boiling point, °C
Vapor pressure, mmHg
7.6 (457 C)
5.28 g/cm3 (25 C)
Solubility in water
17.2 g/L (50 C)
29.8 (28 C)
Heat of fusion
Heat of vaporization
Hazards and Protection.
Keep tightly closed. Store in a cool dry place.
Wear appropriate government approved respirator, chemical-resistant gloves, safety goggles, other protective clothing.
Wear positive pressure self-contained breathing apparatus (SCBA).
Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete.
Stable at normal temperatures and pressures.
Iodine, Hydrogen iodide, Tin/tin oxides.
Extinguish using Carbon dioxide, dry chemical powder, or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Emits toxic fumes under fire conditions.
Fire may produce irritating, corrosive and/or toxic gases.
Toxic. May cause sensitization by inhalation and skin contact. May cause harm to the unborn child. Irritating to eyes, respiratory system and skin. Harmful by inhalation, in contact with skin and if swallowed. Target organ(s): Thyroid.
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed.
Contact with molten substance may cause severe burns to skin and eyes. See Inhalation.
If swallowed, wash out mouth with water provided person is conscious. Call a physician.
If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
Assure adequate flushing of the eyes by separating the eyelids with fingers.